18–28 cm, 2–3 ply, long-fiber tensile strength. Factory-direct from Hebei to your facility.
Cost, hygiene and operational efficiency — the three reasons facility managers move from standard retail rolls to JRT.
~180 m per 2-ply roll (~120 m for 3-ply) — many times a standard retail roll, so cleaning staff swap rolls far less often.
High bulk volume drives down per-wipe cost — the reason facility procurement teams standardize on JRT across sites.
Virgin pulp long fibers resist breaking inside dispensers — no jams, no double-pulling, no wasted sheets on wet hands.
Fully enclosed jumbo dispensers minimize surface contact — critical for healthcare and food-service washrooms.
| Dimension | Jumbo Roll (JRT) | Standard Retail Roll |
|---|---|---|
| Paper per roll | ~180 m (2-ply) / ~120 m (3-ply) | Short consumer rolls |
| Changeover frequency | Low — days of service per roll in busy washrooms | High — multiple swaps per day |
| Dispenser type | Enclosed commercial jumbo dispenser | Open holders, retail packs |
| Primary buyers | Facility managers, cleaning contractors, distributors | Retail shoppers, hotel guest rooms |
| Cost logic | Bulk FOB pricing, lowest cost per use | Retail margin per pack |
JRT is the workhorse of enclosed-dispenser washrooms where traffic is heavy and changeovers must stay minimal. We tune diameter, ply and core to each venue.
Terminals, stations and service areas with continuous footfall — 28 cm 3-ply rolls that last days per unit and cut cleaning-labour changeovers.
Clinics, wards and care facilities — enclosed-dispenser hygiene, low-dust virgin pulp with per-batch COA for infection-control compliance.
Multi-floor corporate washrooms and business parks — standard 76 mm core fits mainstream commercial dispensers, with predictable monthly consumption.
Shopping centres, cinemas and supermarkets — high-capacity rolls that survive peak-hour traffic at the lowest cost per use.
Back-of-house and public-area washrooms for hotels, resorts and convention centres — guest-soft, budget-friendly yield for housekeeping.
Industrial sites, campuses, canteens and municipal buildings — durable, economical JRT on scheduled bulk replenishment.
Every parameter is verifiable and customizable. Send your dispenser brand and core measurement — we match diameter, core and ply, then sample before the container.
| Parameter | Standard Range | Custom Available |
|---|---|---|
| Roll Diameter | 18 cm / 24 cm / 28 cm | ✓ Custom ±2 cm |
| Roll Height (Width) | 9 / 9.5 cm standard | ✓ Custom to your dispenser |
| Ply | 2-ply / 3-ply | ✓ Custom layup |
| Basis Weight (GSM) | 13 – 18 g/m² | ✓ Within range, per target market |
| Core Inner Diameter | 76 mm (standard) | ✓ 55 mm / custom |
| Meterage per Roll | ~180 m (2-ply) / ~120 m (3-ply) | Consult for bulk targets |
| Packing | 6 / 8 / 10 / 12 rolls per carton | ✓ Custom count, barcode & shrink-wrap |
| Embossing | Edge embossing / smooth | ✓ Micro embossing patterns |
| Material | 100% virgin wood pulp, long/short fiber proportioned | ✓ Softness / strength tuning |
| MOQ — White Label | 20GP mixed container | — |
| MOQ — Custom Print | 1×40’HQ full container | — |
| Dispenser Type | Core ID | Max Roll Diameter | Recommended Ply |
|---|---|---|---|
| Standard enclosed jumbo dispenser | 76 mm | up to 24–28 cm | 2-ply (balance of softness & yield) |
| Compact jumbo dispenser | 76 mm | up to 18–20 cm | 2-ply / 3-ply premium |
| Small-core commercial dispenser | 55 mm | up to 18–24 cm | 2-ply |
| High-traffic transit / hospital units | 76 mm | up to 28 cm | 3-ply (max wet strength) |
COA per batch (tensile, brightness, moisture, fiber composition) plus meterage weighing on video before containers seal. Send us your dispenser brand and a core measurement — we match, then ship a trial roll so your facility team can verify fit before the container.
Click any plate to enlarge. All models available in white-label or custom-printed cartons.
We manufacture in Mancheng, Baoding — the heart of Hebei’s paper production base — and export direct, with no trading layer between you and the mill.
100% virgin pulp parent rolls mounted and tension-set for high-speed converting.
Precision slitting to target width; rewinding tension controls density and meterage honesty.
Edge, micro or smooth finishes — pattern fidelity checked inline.
Per-batch weighing and meter verification — the numbers you ordered are the numbers boxed.
6/8/10/12-roll cartons, moisture-proof stacking, pallet strapping ready for the container.
Tensile strength, brightness, moisture and fiber composition verified — plus high-temperature sterilization and a zero fluorescent-brightener check. COA generated per batch before converting starts.
Rewinding tension monitoring, embossing pattern fidelity and sheet / meterage counts checked while the line runs.
Carton sealing integrity, pallet stability and container seal inspection — with loading video recorded for your file.
From a logo or a brief to a delivered private-label container. We handle carton artwork, core-wrap printing and multilingual labels in-house, with a DFM check and 3D mockup before mass production.
CMYK-printed cartons and master packs designed around your brand, with barcode, batch coding and shrink-wrap to your retail or facility spec.
Printed core wrap carrying your logo, brand colours and multilingual usage text — the roll itself becomes a branded surface inside the dispenser.
We match core ID (76 mm / 55 mm / custom), diameter (18–28 cm), ply and GSM (13–18) to the dispensers already installed across your facilities.
Send a package design (AI / PDF) or a sample; we run DFM feasibility on weight, size, core ID and packing rate, then confirm with a 3D mockup before tooling.
Free design support: send a logo or a brief and our team drafts the carton artwork, core wrap and multilingual labels — full OEM / ODM from design to delivery, with no extra plate-setup fees on repeat orders. See OEM & Private Label
Long-term B2B partners across North America, Europe and the GCC — judged on honest meterage, dispenser fit and on-time containers.
We standardized jumbo rolls across 40 managed sites. The meterage is honest — every roll weighs what the spec sheet says — so our changeover schedule finally holds. Six years running, not one short-shipped container.
As a hygiene distributor, dispenser fit is everything. They matched our 76 mm and 55 mm core brands exactly and sent a COA with every batch, which our healthcare clients require. Sampling to first container took five weeks.
Loading is filmed before the container seals and the sailing date has never slipped. For a GCC wholesaler moving volume every month, that predictability is worth more than the last cent of FOB price.
MOQ, core matching, yield, certification, lead time and factory visits — answered before you have to ask.
White-label JRT starts at one mixed 20GP container — you can combine jumbo rolls with other categories. Custom-printed packaging requires one 1×40’HQ full container per SKU.
Yes. Our standard core is 76 mm inner diameter and we regularly produce 55 mm and custom core sizes. Send your dispenser brand and core measurement; we match diameter, core and ply before sampling.
A 2-ply roll carries roughly 180 meters of paper and a 3-ply roll roughly 120 meters — many times a standard retail roll — which is why facilities switch to JRT: far fewer changeovers per week for cleaning staff.
Every batch ships with a COA covering tensile strength, brightness, moisture and fiber composition. Third-party inspection at the mill or your destination port is welcome.
Samples in 1–3 working days. Mass production takes 25–30 working days for a first order including any plate making, and 20–25 working days for repeat orders, then loading and sailing from Tianjin Port.
Yes. We dispatch trial rolls via DHL within 1–3 working days with a QC snapshot report, so your facility team can run dispenser fit and usage trials before committing to a container.
We are a direct manufacturer — in-house converting, printing and QC in Mancheng, Baoding, Hebei, with no trading layer between you and the mill.
Our factory is in Mancheng, Baoding City, Hebei Province — about 1.5 hours’ drive from Beijing. Clients from home and abroad are warmly welcome to visit and audit the line.
We normally ship FOB Xingang / Tianjin Port, China, then load to the vessel accordingly. Container sealing is filmed before departure.
Send your dispenser brand, target diameter and monthly volume. We match core, ply and GSM, then ship a trial roll and a firm FOB price within 1–3 working days.
