When setting up a toilet paper holder, there’s more than meets the eye. It’s not just about securing a roll to the wall, it’s about ensuring accessibility, durability, and style—whether you’re using eco toilet paper or bulk toilet paper rolls.
Selecting the Ideal Spot
Choosing the right spot is crucial. A toilet paper holder should typically be 26-28 inches above the floor, within easy reach from the toilet. Consider the size of your bathroom and who will use it. Adjust the positioning accordingly for homes with custom toilet paper needs or bulk storage. The proximity is key for smaller bathrooms—too far, and it becomes inconvenient.
Tools You Need for Installation
Gathering the right tools ensures a smooth installation. You’ll need:
- A drill
- Screws and anchors
- A level
- Measuring tape
- A pencil for marking the spots If your holder is designed for heavy-duty use, like wholesale toilet paper or tissue toilet rolls, anchors are especially important for extra stability.
Measuring and Marking for Precision
Accurate measurement is essential for a well-positioned toilet paper holder. Start by holding the holder against the wall at the ideal height (typically 26-28 inches from the floor). Using a level ensures the holder is perfectly aligned horizontally. Mark the points where the screws will go using a pencil. For those using larger rolls, such as bulk toilet paper rolls, consider placing the holder slightly higher or farther from the toilet to accommodate the extra size without obstructing the bathroom’s flow.
Once you’ve marked the spots, double-check the measurements. This step ensures that the holder will be easily accessible and centered, particularly if you’re installing a custom toilet paper holder or one designed for heavier use. Small adjustments now will save time later.
Drilling and Installing Anchors
Drilling comes next, and this is where careful attention is crucial. For drywall installations, use a standard drill bit to create small pilot holes at the marked locations. If you’re working with tiled walls, use a masonry drill bit to prevent cracking the tile surface. Drill slowly and steadily to avoid damage.
Once the pilot holes are ready, insert wall anchors if necessary. Anchors are critical for securing heavier holders, especially those intended for larger tissue toilet rolls or wholesale toilet paper. Push the anchors into the holes and lightly tap them flush with the wall using a hammer. If you’re working with a hard surface like tile, ensure the anchors are specially designed for harder materials to maintain long-term stability.
Fastening the Holder
With the anchors firmly in place, it’s time to attach the holder itself. Align the holes on the holder with the drilled spots on the wall, then fasten it securely using screws. Tighten each screw slowly, ensuring the holder remains level and doesn’t tilt. For heavier setups, like those intended for eco toilet paper or bulk toilet paper rolls, make sure to use screws that are strong enough to handle the weight.
As you tighten the screws, check for any wobbling or instability. Even if everything feels secure initially, it’s important to ensure the holder is sturdy enough to support frequent use. If it shifts or doesn’t sit flush against the wall, make adjustments by tightening the screws further or adding extra support.
Testing and Final Adjustments
Once everything is installed, it’s time to test. Place a roll of toilet paper on the holder and check its stability by pulling gently on the roll. The holder should remain firm, without any movement. If you’re installing bulk toilet paper rolls or heavier custom toilet paper options, test with the larger rolls to confirm the holder can manage the size and weight without sagging or pulling away from the wall.
If the holder wobbles or isn’t aligned correctly, loosen the screws and adjust it. Make sure it sits straight and that the paper rolls easily. For high-traffic areas, like commercial restrooms where wholesale toilet paper is used, this step ensures the holder will stand up to heavy use. After testing, if everything is in place and functioning properly, you can confidently say the installation was a success!
Proper Ways to Dispose of Toilet Tissue
Is Tissue Paper Biodegradable and Eco-friendly?
Conclusion
Installing a toilet paper holder is a quick task, but attention to detail can make all the difference. Whether you’re outfitting a home bathroom with eco toilet paper for sustainability or installing a holder for bulk toilet paper rolls in a commercial setting, a proper setup ensures that it’s functional and durable for years to come. A little care and preparation will have you rolling smoothly.
If you are looking for toilet roll paper manufacturers and suppliers, we recommend checking our products.
We have more than 15 years of export experience and offer samples before order placement. To get a customized quote, Contact Us Now!
